Design your cable. Jumper gets it quoted and built.
Spec a cable assembly in your browser and get a drawing, bill of materials, cut list and test table straight away. Then send it to independent US cable shops that take small batch and quick-turn work. (Sending is coming soon.)
No account needed. It opens with a sample drone cable you can edit.

| Signal | From | To | Gauge | Color |
|---|---|---|---|---|
| VBAT | J1.1 | J2.1 | 26 AWG | RD |
| TX | J1.2 | J2.3 | 28 AWG | YE |
| RX | J1.3 | J2.4 | 28 AWG | GN |
| SCL | J1.4 | J2.5 | 28 AWG | BU |
| SDA | J1.5 | J2.6 | 28 AWG | WH |
| GND | J1.6 | J2.2 | 26 AWG | BK |
Three steps from idea to quote.
Every prototype, test rig and product revision needs new cables. Jumper is built to make the spec complete the first time, so quoting does not start with a phone call.
- 1
Enter the wire list
Connectors, pins, gauge, color and length. Add twisted pairs, heat shrink, sleeving and labels where they belong.
- 2
Jumper generates the package
Diagram, drawing, bill of materials, cut list, continuity table and label file. Change a wire and every document follows.
- 3Coming soon
Get quotes from cable shops
Send the package to matched shops and compare their quotes side by side.
Built in the USA, by small shops.
Jumper connects engineers with small and mid-size cable shops across the United States: owner-run shops that take prototype and low-volume work and turn it fast. Every shop in the directory is US-based. Your cable is built here, by people you can call, and every order keeps American manufacturing capacity busy.
One wire list. The whole build package.
Generated for the sample cable, HAR-0142. Nothing below was drawn or typed by hand.
| JST GH 6-pos housing | GHR-06V-S | 1 ea |
| Micro-Fit 3.0 6-pos housing | 43025-0600 | 1 ea |
| JST GH crimp terminal | SSHL-002T-P0.2 | 6 ea |
| Micro-Fit 3.0 crimp terminal | 43030-0007 | 6 ea |
| UL1061 PVC, 26 AWG, red | 151 mm |
| J1.1 | J2.1 | VBAT | Continuity |
| J1.2 | J2.3 | TX | Continuity |
| J1.3 | J2.4 | RX | Continuity |
| J1.4 | J2.5 | SCL | Continuity |
- Drawing, print to PDF
- Bill of materials
- Cut list
- Continuity test table
- Label print file
Built around how cables are made.
The wire list is the spec
Every document is generated from one from/to table. There is no second copy to keep in step and nothing to redraw after a change.
Twisted pairs, specified properly
Lay length, untwisted length at each end and twist direction are part of the spec, and the extra wire a twist uses is added to each length.
Positions a shop can measure
Heat shrink, sleeving and labels are placed by distance from the back of a connector and drawn to scale, the way they are measured on the bench.
Checks while you type
A pin used twice, a pin that does not exist or a pair with one wire is flagged on the row, before it reaches a drawing.
Try it with the sample cable.
Change a wire, move a label, and watch the drawing update.